73
PVP250kW & PVP260kW Inverter
Installation & Operation Manual
Figure 7-1 Air Intake Hood
2. Remove the four lters by loosening the wing nuts on the lter brackets.
3. Clean the lters by vacuuming or blowing out using an air hose with a diffuser.
4. After cleaning, inspect the lters for damage to the lters or frames.
Contact PV Powered if you wish to replace the lters or frames.
5. Reinsert the lters and close the air intake hood.
Figure 7-2 Air Intake Hood in Raised Position for View of
Blower Intake Filters and Brackets
Air Filters
Blowers
Comments to this Manuals