PV Powered PVP260kW User Manual Page 35
- Page / 150
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Planning
GENERAL REQUIREMENTS FOR PLANNING
AND INSTALLATION
Planning for an installation of an AE inverter should only be performed by qualified
engineers with a thorough understanding of the processes involved for a successful
installation. Licensed and trained installers must comply with all local and national
code requirements for the installation of electrical power systems with AC and DC
voltages to 600 V.
The inverter must be anchored to a concrete mounting pad. The mounting pad must
meet local seismic requirements. Refer to the mechanical drawings in this manual for
optional seismic-rated concrete pad mounting requirements.
HANDLING THE INVERTER
WARNING:
Heavy equipment. PVP250kW/PVP260kW units weigh up to 2360 kg (5200
lb) with pallet and packaging. If the unit is lifted incorrectly, it may result in
death. In addition, improper handling may result in serious damage to the
unit and may also void the warranty. Keep all doors securely closed while
moving the unit. Only use lifting equipment that is rated for the weight of the
unit. Only use the specified lifting points.
AVERTISSEMENT:
Équipement lourd. Les unités PVP250kW/PVP260kW pèsent jusqu’à 2360
kg (5200 lb) avec palettes et emballage. Tout levage inadéquat de l’unité
peut provoquer la mort. De plus, toute manipulation inadéquate peut
provoquer des dommages graves à l’unité et pourrait aussi annuler la
garantie. Garder toutes les portes bien fermées lors du déplacement de
l’unité. Utiliser uniquement un équipement de levage d'une capacité
nominale convenant au poids de cette unité. Utiliser uniquement les points
de levage spécifiés.
The inverter can weigh up to 2360 kg (5200 lb) with the pallet and packaging. If the
inverter is improperly handled, serious damage can occur and the warranty may be
voided. Only use lifting equipment that is rated for the weight of the inverter. Only
Advanced Energy® PVP250kW and PVP260kW Inverters
Chapter
3
570-1001792-05A Planning 3‑1
- Advanced Energy 1
- PVP250kW and 1
- PVP260kW Inverters 1
- COPYRIGHT 4
- PRODUCT USAGE STATEMENT 4
- TRADEMARKS 5
- CUSTOMER FEEDBACK 5
- • [email protected] 6
- • [email protected] 6
- Table of Contents 7
- Chapter 3. Planning 8
- Chapter 4. Installing 8
- Chapter 5. Operation 8
- Chapter 7. Maintenance 9
- Appendix A. Specifications 10
- List of Tables 11
- List of Figures 13
- Safety and Product Compliance 15
- Guidelines 15
- SAFETY GUIDELINES 16
- PERSONAL SAFETY 17
- INTERPRETING PRODUCT LABELS 17
- PRODUCT COMPLIANCE 18
- Fire Prevention 21
- ACRONYMS AND FREQUENTLY USED 22
- Product Overview 25
- PRODUCT FEATURES 26
- Card cage assembly 28
- Data Monitoring Card Cage 29
- Operator Interface Controls 30
- Active Cooling System 30
- DC Combiner Sub Panel 30
- DC Sub Panel 31
- DC Distribution PCB 31
- WARNING: 32
- AVERTISSEMENT: 32
- AC Sub Panel 33
- Power supply fuses 34
- Soft start fuses 34
- Planning 35
- LOCATION AND CLEARANCES 36
- 570-1001792-05A Planning 3‑3 37
- CONDUIT AND CONDUCTORS 38
- ENVIRONMENTAL REQUIREMENTS 38
- GROUNDING AND NEUTRAL 39
- REQUIREMENTS 39
- UTILITY GRID INTERCONNECTION 40
- INVERTER MONITORING 41
- CALCULATING DC INPUT VOLTAGE 41
- DC SUBCOMBINER OPTIONS 41
- Fuse Protection for DC Input 42
- Installing 43
- PRE-INSTALLATION INSPECTION 44
- Figure 4‑2. Screen check 45
- Figure 4‑7. Screen inspection 47
- Figure 4‑9. Fan inspection 48
- CONDUIT ENTRY POINTS 51
- CAUTION: 53
- ATTENTION: 53
- ELECTRICAL CONNECTIONS 54
- Figure 4‑14. AC connections 59
- CONNECTING TO THE PV ARRAYS 60
- Figure 4‑16. DC connections 60
- Operation 67
- INVERTER OPERATING STATES 68
- 570-1001792-05A Operation 5‑3 69
- DISPLAY SCREENS AND OPERATION 70
- GROUND FAULT INTERRUPT DEVICE 72
- TO SHUTDOWN THE INVERTER 73
- TO DE-ENERGIZE THE INVERTER 74
- Data Monitoring and Controls 77
- Ethernet Network Connection 78
- MODBUS OVERVIEW 81
- Modbus TCP Installation 82
- TO SET NETWORK BIASING 89
- Table 6‑4. Biasing enabled 89
- Setting the Modbus Address 90
- MODBUS COMMANDS 95
- (Continued) 97
- MODBUS DATA TYPES 98
- MODBUS REGISTER MAPPING 98
- Modbus Data Registers 101
- Modbus Command Registers 104
- Related Links 105
- Maintenance 107
- MAINTENANCE SCHEDULE 108
- VISUAL INSPECTION 108
- REPLACEMENT PARTS 109
- TOOLS REQUIRED 110
- TO MAINTAIN THE AIR FILTERS 110
- Air filters 111
- Card cage air filter 111
- Troubleshooting and Solar 113
- Energy Technical Support 113
- TROUBLESHOOTING WARNINGS AND 114
- Figure 8‑1. Warning screen 115
- SYSTEM WARNINGS 115
- AC UNDER VOLTAGE FAULT 117
- IDENTIFYING A GROUND FAULT 117
- TO RESOLVE A GROUND FAULT 118
- DANGER: 119
- INVERTER FAULT CODES 120
- Table 8‑2. Fault categories 120
- Table 8‑3. Drive (DRV) faults 121
- Grid Faults 122
- Table 8‑5. Grid (GRD) faults 123
- System Faults 124
- PCB STATUS LEDS 125
- Status LED lights 126
- Table 8‑9. Link LED 127
- Table 8‑10. Activity LED 127
- Table 8‑11. Status LED 128
- Table 8‑12. Modbus LED 129
- ☞ Important 130
- Specifications 131
- Efficiency Specifications 134
- CEC Efficiency = 96.5% 135
- COOLING SPECIFICATIONS 137
- ENVIRONMENTAL SPECIFICATIONS 138
- SYSTEM DIAGRAM 139
- MECHANICAL DIAGRAMS 140
- WEIV MOTTO 141
- TW.CLA TC W.TCA 143
Related products and manuals for Power adapters & inverters PV Powered PVP260kW
(32 pages)
(84 pages)© 2020, manymanuals.com. All rights reserved. | 0.597 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals